5 Channel Full Range Digital Amplifier. 125W x 4CH + 300W @ 2Ω / 80W x 4CH + 180W @ 4Ω. 250W x 2CH @ 4ΩBridged (Front & Rear) RMS Power Output. Crossover Filter : 50-500Hz (HPF), 12dB Per Octave Slope (Front & Rear), 50-250Hz (LPF), 24dB Per Octave Slope (Sub). Overall Operation Efficiency: >82%. Selectable REM / VOX / DC Turn On Modes. Selectable 2CH / 5CH Input Modes.
Notify me when this product is in stock:
5 Channel Full Range Digital Amplifier. 125W x 4CH + 300W @ 2Ω / 80W x 4CH + 180W @ 4Ω. 250W x 2CH @ 4ΩBridged (Front & Rear) RMS Power Output. Input Sensitivity: 0.2-10 Volt. Crossover Filter : 50-500Hz (HPF), 12dB Per Octave Slope (Front & Rear), 50-250Hz (LPF), 24dB Per Octave Slope (Sub). Frequency Response: 10-33KHz. Signal to Noise Ratio: > 90dB. Overall Operation Efficiency: >82%. Selectable REM / VOX / DC Turn On Modes. Selectable 2CH / 5CH Input Modes.
| Amplifier | 5 Channel |
|---|---|
| RMS Power (1Ω) | N/A |
| RMS Power(2Ω) | 125W x 4CH + 300W |
| RMS Power (4Ω) | 85W x 4CH + 180W |
| Topology | Full Range Class-D |
| Frequency Response | 10-33KHz |
| Power Supply | 12-14.4V |
| Power Supply (Threshold) | 8.4V-16.5V |
| Idle Current | 1.25A |
| Distortion - THD (1KHz@4Ω) | <0.3% |
| Distortion - S/N Ratio (A weight @ 1W) | >90dB |
| Distortion - S/N Ratio (A weight @ FP) | -88dBA |
| Input Sensitivity Low | Wide Range Input Sensitivity |
| Input Sensitivity High | 0.3 - 8.5V |
| Input Impedance - Low Input Level | 22KΩ |
| Input Impedance - High Input Level | N/A |
| Output Impedance | 2Ω |
| Damping Factor (50Hz@4Ω) | >100 |
| Bandwidth (-3dB) | 10Hz-30KHz,10Hz-300Hz |
| Crossover (-12 dB/ Oct) Variable High-Pass | 50Hz-500Hz |
| Crossover (-12 dB/ Oct) Variable Low-Pass | 50Hz-500Hz |
| Crossover (-12 dB/ Oct) Variable Sub-Sonic | 10-55Hz(SUB) |
| FUSE Ratings - ATC | 40Ax2 |
| Dimension - Length x Width x Height - Inches(mm) | 11.0” x 6.3” x 1.9” (279.5 x 160 x 48.3 mm) |
